21
Symbol
Meaning
20
Battery charge control
Fault in the alternator or alternator charging circuit. The battery
is no longer charged. Eliminate the fault immediately. Consult the Hatz manual!
21
Oil pressure display
Switch off the engine immediately! Danger of engine damage.
Check the oil level. Consult the Hatz manual!
Contact Hatz service if the oil level is correct.
22
Engine temperature display
Switch off the engine immediately! Danger of engine damage.
Engine temperature is impermissibly high. For details of troubleshooting,
consult the Hatz manual.
23
Air filter maintenance display
This lights up if the air filter is dirty. Clean or renew the
filter cartridge at the next opportunity.
For more information, see the Hatz manual.
NOTES:
Start for max. 30 seconds. If the engine is still not running after that, turn the starting key back to
position "0" and eliminate the cause (Consult the Hatz manual).
Turn the starting key to position "0" every time you want to start the engine.
The anti repeat device in the ignition lock makes it impossible for the starter to engage while the
engine is running and become damaged.
The starter protection module is required when the user cannot detect at the ignition lock if the engine
is still running or is already at a standstill.
In models equipped with a starter protection module, the starting key must be kept in the 0 position
for at least 8 seconds before another start is possible after the engine is switched off.
Starting the diesel engine
1.
Take place on the operator platform
The platform is fitted with a safety switch so there is no milling and driving possible when there
is no one on the platform.
2.
Attach the cord of the deadman switch to your arm or clothing.
3.
Pull out the emergency shut down button.
4.
Check the diesel throttle (see chapter 2. Machine description, item 33).
5.
Remove the protective cap from the ignition lock.
6.
Insert the starting key all the way and turn to position "I", wait 10
seconds.
7.
Check the display (3) on the control panel, push the right button of the
display, this will open the information screen.
8.
Turn the starting key to position "II".
9.
As soon as the engine is running, release the starting key.
▪ The starting key springs back to position "I" and remains in this position
during operation.
▪ The battery charge control (20) and oil pressure display (21) go out.
10.
Wait till the line “Motor running” is green and the “Cooling Fan Active” is
blue.
11.
Connect the dusthose and turn the dustcollector on.
NOTES:
In case of irregularities, switch off the engine immediately. Identify the fault and eliminate it. For
details of troubleshooting, consult the Hatz manual.
If the engine stops again immediately after starting, or stops independently during operation, this is an
indication that a monitoring element of the automatic shutoff has been activated. Remedy the fault
before making further starting attempts (Consult the Hatz manual).
Despite the automatic switch-off, check the oil level every 8–15 operating hours and add oil if
necessary, (Consult the Hatz manual).
