www.blastrac.eu
9
3.7
Transport safety
a)
Be aware of your surroundings and machine operating level. Do not side hill, do not run on steep incline,
this could cause machine to tip over.
b)
The weight of the BMP-335 is between 400 / 500 kilogram (depending on version). Use a crane or lift
when transporting the machine, use the lifting eyes on the machine.
c)
Before every use check the lifting eyes and welds for: deformation, damages, cracks, corrosion and wear.
d)
When lifting the machine from the ground, always use the lowest lifting speed. The cables must first be
tensioned at this speed; they must not be slack when the machine is lifted from the ground.
e)
During hoisting make sure to be at a safe distance from the machine with the most optimal view on the
machine and working environment.
f)
Never stand directly below the machine.
g)
When transporting the machine do so in such a manner that damage due to the effects of the use of force
or incorrect loading and unloading is avoided.
h)
The lifting eyes can also be used to fasten the machine on a pallet or during transport.
i)
Always drive backwards when driving up to a ramp or grade, and forwards when driving of the ramp.
j)
Chock wheels for transport and keep the paddles in engaged position, this will function as a brake on the
wheels.
k)
Don’t leave the machine unsecured on jobsites.
l)
Park the machine always on a flat horizontal and levelled surface.
m)
Remove the dirt, dust and debris from the machine before transport.
n)
Make sure the electrical cable and dust hose are disconnected before transport.
o)
Store the cleaned and dry machine in a humid free room. Protect the motor from moisture, heat dust and
shocks.
p)
Never use the machine for lifting persons or items.
q)
It is possible to transport the machine without the use of the motor by pushing the paddles. The drive
wheels are declutched of the drive motors now. Make sure that the floor is flat, because the machine is
uncontrolled now!
It is very dangerous to drive the machine on a grade or ramp when the
paddles are in disengaged position!
Never load or unload the machine on a ramp or incline when the
wheels are in the disengage mode. Failure to do so could cause machine to run away, damage to the
machine, damage to property or cause serious injury.
r)
Only lift the machine as shown in the picture below. Use the existing lifting points to lift the machine.
Without drum
442 kg
Summary of Contents for BMP-335
Page 1: ...Original instructions in English language OPERATING INSTRUCTIONS BMP 335 ELITE VERSION 1 0...
Page 12: ...12 www blastrac eu 4 4 Tilting the machine backwards 1 2 3 4 5 6...
Page 14: ...14 www blastrac eu 4 6 Electric drive 1 2 3 4 5 6...
Page 18: ...18 www blastrac eu CW Rotating direction of the drum ClockWise normal Drum up down quick lever...
