Blastrac BMP-335, Operating Instructions Manual

Page: 27 / 30

www.blastrac.eu
27
A precise estimation of the level of exposure to vibration and noise should also take in account the times when
the machine is switched off or even running, but not actually in use. This may significantly decrease the
exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration and noise such as:
proper and regular maintenance of the machine and the accessories, keeping the hands warm, provision of
proper ear protection and organization of work patterns for example by using rotation schedules. The use of
anti-vibration gloves could also decrease the effects of the vibrations transmitted.
Always use hearing protection when working with this machine.
We always recommend taking measures to decrease hand-arm vibrations.
Extension cables
Cable length
Cross section
≤ 16 A ≤ 32 A ≤ 63 A ≤ 125 A
Calculated at a pre-fuse GG:
16amp* 32amp* 63amp* 125amp*
> 20m
1.5 mm² 2.5 mm² 10 mm² 25 mm²
20m > 50m
2.5 mm² 4 mm² 10 mm² 25 mm²
50m > 75m
4 mm² 6 mm² 16 mm² 35 mm²
*The cross-sections need to be re-calculated when using any other type or size pre-fuse than mentioned.
Tips for decreasing the exposure to hand- arm vibrations:
-Protect the hands with vibration dampening gloves
E12000 – Blastrac Anti-vibration gloves
-Switch off the motor when driving backwards
-Check and replace the tools regularly
-Proper maintenance of the machine
-Scheduled replacement of the shock absorbing machine parts
-Keep the hands warm
-Prepare a work schedule and plan in rest periods