Blastrac BMP-335, Operating Instructions Manual

Page: 20 / 30

20
www.blastrac.eu
5.3 Operating during scarifying
Watch the ammeter during work.
Scarify motor:
3x400V-50Hz = Maximum 19,6 amp
3x480V-60Hz = Maximum 16,6 amp
3x400V-60Hz = Maximum 19,7 amp
Direction guidance.
Spindle locking system
5.4 Switching off the machine
 Pull the quick lift lever up and turn the fine adjustment until the cutters do not hit the ground
anymore.
 Push both red buttons on the panel.
 Wait until all turning parts have reached a standstill.
 Switch off the dust collector.

Disconnect the power supply.
 Pay attention that all twisting and turning machine parts have reached a standstill before inspection or
maintenance duties are carried out.