Blastrac 655DC, Operating Instructions Manual

Page: 37 / 112

655DC Operating Instructions
Initial operation
3
;
Connect the blast cleaning machine and the dust collector with
the dust hose. Use hose clamps or duct tape at the
connections.
; Connect the electric cable of the filter unit with the site supply.
Make sure that you use the correct electric supply (Chapter 1.2).
Press the test button to check the function of the residual
current operated device!
; Check that the dust container of the dust collector is empty.
5.2 Initial operation
All persons in the proximity of the dust collector must wear ear
protectors, safety glasses with lateral protection as well as
safety shoes. The operator is obliged to wear close-fitting
protective clothing.
The start of the dust collector is effected in the following sequence:
1 Switching on of the dust collector
ˆ Main switch of the dust collector "ON"
ˆ Compressor/Fan "ON"
ˆ Check the turning direction of the filter and compressor motor.