Blastrac 655DC, Operating Instructions Manual

Page: 21 / 112

655DC Operating Instructions
Safety instructions
11
2.10 Regulations
Work on
electrical equipment or operating materials may only be
undertaken by a skilled electrician or by trained persons under the
guidance and supervision of a skilled electrician as well as in
accordance with the electrical engineering regulations .
The electrical equipment for the plant must be
inspected regularly .
Defects such as loose connections or scorched cables must be
rectified immediately . Call a skilled electrician or our Customer
Services.
Be sure that the operators and maintenance personnel are
familiar with the following:
ˆ Lubrication, cleaning and repair works can only be done when
the dust collector is in standstill.
ˆ Make sure that the dust collector can not be set working during
the duration of the works.
ˆ Do not open or remove protective guards while driving gears
are running.
ˆ
Once cleaning, lubrication or repair works are finished do not
forget to fix again the safety devices .
ˆ Do not touch any moving parts or stand in their path
ˆ After cleaning, lubrication and repair works and before starting
the dust collector, be certain that any person is in a dangerous
area.
A second person must be at side in order to manipulate the
emergency switch or rather the main switch with
overvoltage release
if maintenance or repair requires working on live parts.
The work area must be blocked off using a red and white
safety
chain and a danger sign. Use a tool that is insulated against
voltages .
Only start work once you are familiar with the electrical engineering
regulations that apply to your area.