Blastrac 655DC, Operating Instructions Manual

Page: 22 / 112

Operating Instructions 655DC
Safety instructions
12
2.11 Pay attention to the order of the following five
golden
rules
1. Disconnect all
2. Secure it against unintended restart
3. Check that there is any electric tension
4. Earthing and short-circuiting
5. Put a barrier or cover neighbouring under voltage
standing parts
The rules 4 and 5 are only prescribed for equipment over 1000 V.
Do not be persuaded by
third parties to give up the required
switching-off while repairing. The above-mentioned meanings of
work do not include the troubleshooting, so measurement.
Only use voltage seekers that
comply with the regulations when
troubleshooting. From time to time check voltage seekers to ensure
that they are operationally efficient.
Only use tools that are in
good operating condition . Damaged tools
should be immediately repaired or replaced .
Use the available
personnel protection equipment and safety
clothes to protect you when you are working (e.g. safety glasses,
safety gloves safety shoes, etc.).