Blastrac 655DC, Operating Instructions Manual

Page: 28 / 112

Operating Instructions 655DC
General
6
Motor output:
5.5 kW
Air throughput: 1250 m³/h
Connected cable length: 20 m
Dust hose
Length:
20 m
Diameter: 130 / 150 mm
All connection points must be sealed carefully and the dust hose
must be fixed and sealed with duct tape or hose clips !
The filter housing must be sealed properly and all sealings must
be in good condition!
If dust leaves the dust collector instead of clean air, this is a sign
that the filter cartridges are either damaged or not fixed correctly
inside the filter chamber.
The air streams through the dust collector as follows:
ˆ The air stream then flows through the approx. 20 m long flexible
dust hose taking dust and fine particles with it.
ˆ The air stream now enters the filter chamber of the dust collector
where the dust and the fine particles are separated from the air.
The cleaned air is then fed into the environment again.