Blastrac 655DC, Operating Instructions Manual

Page: 36 / 112

Operating Instructions 655DC
Initial operation
2
5.1 Preparations for initial operation
Before switching on make sure that all existing protective housings
are mounted and that the dust collector is connected correctly.
Handle all plugs, cables, hoses and operating devices with care.
Avoid any contact with live wires.
Works on the electrical system must only be carried out by qualified
specialists.
Regular inspection is important in order to avoid downtimes of your
dust collector. Carry out the following checks before any start-up:
; Check whether all dust collector parts are assembled safely and
correctly.
; Check all screws and other fasteners for tight seat
; Check the tightness of the hose connections and the condition of
the hose to the filter.
; Check the electrical connections for dirt and foreign body
deposits.
;
Check the electrical motors for dirt and other contaminants.
Before start-up the operating personnel must be familiar with the
safety regulations given in this manual.
; Check the main power cable and the dust hose for damage.
Replace or repair all damaged parts before starting the
machine.