8
There are 4 hydraulic connections, 1 electrical connection and 2 sleeve
bolts to connect the side shift & adapter to the front of the truck.
The 4 hydraulic rotary couplings should be cleaned before and after
each use. Use brake cleaner or something similar to do so. Use the red
protection caps after each use.
Place a bucket underneath the couplings when connecting or
disconnecting them to catch the drops of oil that may be spilled.
The electrical connection on the truck has a clamp to lock the connector
in place, always use this to prevent any water or dust entering the
connector during work.
The electrical connection on the truck also has a protective cap, always
close it during transport.
The sleeved bolts should always be tightened firmly. Use the wrench
and socket wrench to do so.
2.7 Dust collector 2-45TDC
The 2-45TDC is a very powerful truck mounted dust extractor. This high performance machine is exclusively
designed and built to be used in combination with the Blastrac 2-45D blast cleaning machine. It is equipped
with 24 pieces of specially designed high quality Blastrac cartridge filters. The rotating valves transport all
generated debris directly into 2 BigBags for easy removal.
The Blastrac dust extractor 2-45TDC can
only
be used for
dry cleaning
.
It should
only be
used for removing
noncombustible/non-explosive dust or substances
.
The 2-45TDC may
not
be used for
carcinogenic or pathogenic substances
.
The machine is designed for usage in conditions according to classification
M
(see below).
Classification acc. standard EN 60335-2-69 – Annexe AA
Class
Designation
L
(light hazard) suitable for separating dust with a limit
value of occupational exposure of
greater than 1 mg/m
³
M
(medium hazard) for separating dust with a limit
value of occupational exposure not
less than 0,1 mg/m
³
H
(high hazard) for separating all dusts with all limit
values of occupational exposure,
including carcinogenic and pathogenic dusts.
