5
2.2 Separator, magnetic drum and hopper
The abrasive separator is mounted to the end of the recovery duct. It separates the abrasive from
contaminants and feeds the cleaned abrasive onto the magnetic drum(2). This magnetic drum functions as a
second separator for bigger particles and feeds the cleaned abrasive back to the abrasive storage hopper(7).
Two wire meshes are fitted to prevent any coarse contaminants from getting into the blast wheel. In order to
clean the wire mesh drawers, the drawers can be removed from the sides(8).
1
Separator cover
2
Magnetic drum
3
Deflector
4
Separator
5
Magnetic drum motor
6
Belt cover
7
Hopper
(part of separator)
8
Separator tray
9
Hose connector
1 Separator inc. hopper
2 Separator tray
3 Magnet drum drive
4 Dust hose connection
5 Feed spout
6 Control cage clamps
7 Abrasive sealing
8 Rebound
9 Transport castor (foldable)
