13
PALIOS-IPM2
Part N
o
: 5105.01
SBL
8 pole IP-/ ASI-TV Modulator
IP/ SFP/ ASI (MPEG2)
→
ATV (8x AM)
PCR for current service
*
Use PCR PID
adjustment range: 0..8190
Manual PID settings
*
PCR PID
adjustment range: 0..8190
Video PID
adjustment range: 0..8190
Audio PID
adjustment range: 0..8190
Teletext PID
adjustment range: 0..8190
VBI PID
adjustment range: 0..8190
Subtitle PID
adjustment range: 0..8190
Composition page ID
adjustment range: 0...65535
Ancillary page ID
adjustment range: 0...65535
*
The menu of the manual PID setting only appears, if the respective box is clicked on in the
“Setup“ menu, chapter “GUI settings“ (see also chapter 7.2.6).
The functionality is currently not supported.
Video
setting of the video parameters
Video output
selection: On, auto Off, auto colour palette bar
Color bar
selection: On, Off
Color system
selection: PAL, SECAM, NTSC
Video format
selection: letterbox, center cut, 1:1, pillarbox,
4:3 vertical cut, 20:9 letterbox
Audio
setting of the audio parameters
Audio gain
adjustment range: +6...-20 dB
Audio mode
selection 1: mono L, mono R, dual, dual invers,
stereo, auto
**
selection 2: mono L, mono R, mono L+R, auto
***
**
if sound carrier 2 is set to “On“
***
if sound carrier 2 is set to “Off“
VPS
setting of the VPS parameters
CNI code
adjustment range: 0x000…0xFFF (hexadec.)
Source audio mode
selection: MPEG, A056(MPEG)
Source PIL
selection: A056(PDC), A056, PDC,
TimerControlCode
Complementary data
Teletext
selection: On, Off
WSS insertion
selection: On, Off
Black bar settings
*
Mode
selection: On, Off
The width of the bar can be selected in % related to standard 4:3 format. Different
values for 16:9- and special 16:9 format can be adjusted.
Note:
In certain settings it can occur in picture distortion. The adjustment values ( in %)
in these cases are slightly to change up or down until there are no disturbances
occur more.
*
only available, if “Black bar“ option is enabled (see chapter 7.2.6)
