22
PALIOS-IPM2
Part N
o
: 5105.01
8 pole IP-/ ASI-TV Modulator
IP/ SFP/ ASI (MPEG2)
→
ATV (8x AM)
SBL
8. Factory settings
A short pressing of the reset button on the front of the module causes a reboot, i.e. the module restarts and all stored values are
adjusted. If the module is to be reset to factory settings, the reset button must be pressed so long to keep up until the “POWER“ and
“SYSTEM“ LED will illuminate green permanently. This process takes about 15 seconds. In this case the module is set to the
following:
Input parameters
Output parameters
Setup settings
Network settings
