USA
page 27
To operate the Hood machine, 3 connections are needed:
• Electrical;
• Water supply;
• Water drain.
This is a cycle machine comprising a 170°F (60°C) wash cycle with detergent, a 190°F (82°C) rinse cycle with injection of
rinse-aid in the boiler hull.
20x20 inches (500x500 mm) racks are used. The machine can be complemented with wash-tables, rinse-showers and
dedicated waste collection systems.
A new wash cycle can be started by closing the hood down.
This machine is designed exclusively for washing dishes, glasses and various pots and pans with human food type of residue.
Any other use is deemed improper.
DO NOT wash articles polluted with petrol, paint, chips of steel or iron, fragile objects or material not resistant to the washing
process.
Do not use acidic corrosive chemical products or alkaline and solvents or chlorine based detergents.
Do not open the machine hood when operating. In any case, the machine has a special safety device which immediately
stops the unit if the hood is open, thus preventing water spillage.
Always switch the machine completely off and drain the water tank, before accessing inside.
The heat recovery system reduces signifi cantly the humidity in the dishwashing-room, recovering the energy that is wasted
from the roof, by condensation, by reducing the steam when the door is opened.
The drain pump is used to keep the correct water level in the wash tank and drain it, in case the drain connection is higher
than the machine water discharge pipe itself.
