USA
page 39
8. SIGNALS AND ALARMS
8.1 Signals
The signals messages are displayed, based upon their meaning.
When on the display appears
DETERGENT LEVEL
it means that the detergent level is low (only on machines equipped
with the optional "Chemicals level Sensor").
When on the display appears
RINSE-AID LEVEL
it means that the rinse-aid chemical level is low (only on machines equipped
with the optional "Chemicals level Sensor").
When on the display appears
SHUT HOOD
it means that you are trying an operation that cannot be done with the open
Hood or that you opened the Hood, interrupting a cycle in progress.
When on the display appears
DRAIN WATER IN WASH TANK
it means that you are trying an operation that cannot be
done with the wash tank full.
When on the display appears
SELF-CLEANING: REMOVE FILTERS AND PRESS START
it means that the machine
requires a self-washing cycle.
When on the display appears
SELF-CLEANING CYCLE OVER
it means that the machine has concluded its self-washing
cycle.
8.2 Alarms
The alarm messages are displayed, based upon their meaning.
TYPE OF ALARM
CAUSE
REMEDIES
B1
BOILER FILLING FAIL
Open the water supply valve and check the
overfl ow pipe
B2
BOILER PROBE FAIL.
Contact Technical Service
B3
BOILER HEAT. ALARM
Contact Technical Service
B4
RINSING FAILED
Contact Technical Service
B5
BOILER OVERHEATING
Contact Technical Service
E1
WATER LOAD FAILED
Open the water supply valve and check if the
overfl ow pipe is taken off
E2
TANK PROBE FAIL.
Contact Technical Service
E3
TANK HEATING ALARM
Contact Technical Service
E5
TANK OVERHEATING
Contact Technical Service
E6
TANK DRAINING FAIL.
Check if the overfl ow pipe is taken off . Contact
Technical Service
Z10
ALARM SL8 - BREAK TANK HIGH LEVEL
Contact Technical Service
table 3
9. ENVIRONMENTAL ASPECTS
9.1 Packaging
Packaging is made of the following components:
•
a wooden pallet
•
a nylon sack (LDPE)
•
a multi-layer carton
•
polystyrene (PS) strips
•
polypropylene (PP) banding.
All above materials, shall be disposed and treated in accordance with the Local Laws in force.
9.2 Disposal
The machine must be disposed of according to current regulations: contact the Municipalized Firm responsible
for collection of urban solid waste.
Before disposing of the appliance, disconnect all water and electrical connections.
Cut the electrical cable in such a way as to prevent further use.
As all metal parts are stainless steel, they are therefore recyclable.
Recyclable plastic parts are identifi ed by the plastic symbol.