USA
page 37
5. ECOLOGICAL ASPECTS
5.1 Recommendations for optimal use of energy, water and additives
Use the machine fully loaded when possible: This shall prevent detergent, rinse aid, water and energy consumption
waste.
Detergent and rinse-aids: Use detergents and rinse-aid chemicals with high biodegradability, to best respect the
environment. Verify proper dosage in relation to water hardness at least three times a year. Excess product pollutes
rivers and seas while an insuffi cient dose results in unsatisfactory dish washing and/or hygiene.
Boiler and Wash-Tank temperatures: The boiler and tank temperatures are set by the manufacturer in order to obtain the best
washing results with detergents on the market. The temperatures can be reset by the installer in relation to your detergent.
Pre-washing: Carefully pre-wash with a moderate amount of water at room temperature to facilitate the removal of animal
fats. To remove encrusted materials warm water soaking is recommended.
Note: Wash objects as soon as possible to avoid deposits from drying and compromise eff ective washing.
For eff ective washing routine dishwasher cleaning and maintenance is advised (see chap.
7
).
Disregarding the points listed above and of any the information contained in this manual can cause energy, water
and detergent waste with a subsequent increase in running costs and/or performance reduction.
6. NSF HYGIENE REGULATIONS
• When starting the machine ON, no wash-cycle will be starting until the set boiler and wash-tank temperatures are reached.
During operation, the machine will not start the rinse cycle till the set boiler temperature is reached.
• Remove carefully all solids from the objects to be washed, to avoid obstruction of fi lters, nozzles and piping.
• Drain the wash tank and clean the fi lters at least twice a day.
• Check if the detergent and rinse-aid dosage are correct (as recommended by the manufacturer). In the morning, before
starting the machine, check that the quantity of chemicals in the canisters is enough for daily supply.
• Keep your working tables clean.
• Extract the rack with clean hands or gloves to avoid fi nger marks.
• Do not dry or polish the washed objects with cloths, brushes or rags that are not sterile.
7. MAINTENANCE
7.1 Routine maintenance
WARNING: The machine is not protected against pressurized water jets. Do not use pressure cleaning system
against the machine.
It is recommended to contact the seller of chemicals for proper cleaning instructions, in order to have detailed
indications on methods and products for the correct periodical machine sanitation.
Do not use bleach or chlorine based detergents.
Daily cleaning is needed to ensure that the machine runs perfectly. The following shall be carried out:
• Turn the machine in
STAND-BY
mode, by pressing the push-button
C
of the control panel (see chap.
3
).
STAND-BY
