Blackstar AMPED 1, Owner'S Manual

Page: 14 / 142

English
3. CabRig Switch
Use this to switch between the three CabRig settings currently stored in the
pedal. You can customise the three factory patches using the CabRig section of
Blackstar’s Architect software.
4. Level Control – CabRig Outputs
This control allows quick access, physical control over the XLR, Line Out and USB
audio channel 3 output level. At maximum (fully clockwise), this control has no
effect on the signal level. At minimum (fully anti-clockwise), this control attenuates
the signal on these outputs by 20dB.
CabRig
To access edit CabRig settings you will need Blackstar’s Architect software.
Download Architect from the Blackstar website:
https://blackstaramps.com/architect
Cabinet Channel Strip
The Cab Channel strip allows you to craft and control your virtual cabinet tone.
Ring
Screen
Tip
Left channel
to mixer
Right channel
to mixer
1 2
3