Blackmagicdesign teranex mini, Installation And Operation Manual

Page: 68 / 657

Connectors
1 Mini-B USB Port
Connects to the Teranex setup utility via a Mac OS X or Windows computer for
adjusting settings and updating your Teranex Mini’s internal software.
2 Switches
Adjustable switches for changing settings.
3 LED Status Indicator
Glows white when the converter is receiving power and green when a valid video inputsignal
is detected. Will flash on/off to identify individual converters via Blackmagic Teranex Setup.
4 Power
Standard built in IEC C14 connector for 90 - 240 volt AC power supply.
5 Y or NTSC/PAL
Analog component Y, NTSC or PAL composite input BNC connector.
6 B-Y or S-VIDEO Y
Analog component B-Y, or S-Video Y input BNC connector.
7 R-Y or S-VIDEO C
Analog component R-Y, or S-Video C input BNC connector.
8 Ethernet PoE+
Connects to a network switch or computer so you can change settings using
Blackmagic Teranex Setup. The Ethernet port also supports power over Ethernet plus.
9 SDI Out
SDI video output BNC connector.
10 Optical Output
Optical video output LC connector via optional SMPTE compatible SDI optical fiber
module. The optical output automatically matches the input video.
SDI OUT
L - ANALOG
AES/EBU
R - ANALOG
AES/EBU - T/C
Y or NTSC/PAL B-Y or S-VIDEO Y R-Y or S-VIDEO C
PUSH PUSH
ETHERNET PoE+
OPTICAL
OUT / IN
1 2 3
SDI OUT
L - ANALOG
AES/EBU
R - ANALOG
AES/EBU - T/C
Y or NTSC/PAL B-Y or S-VIDEO Y R-Y or S-VIDEO C
PUSH PUSH
ETHERNET PoE+
OPTICAL
OUT / IN
4 5 6 7
8 9 10 11 12
68 68 Teranex Mini - Analog to Optical 12G