Blackmagicdesign teranex mini, Installation And Operation Manual

Page: 23 / 657

If you need to convert Dolby audio via an AES/EBU source that is sample locked to a
reference, make sure you disable the sample rate converter by deselecting the
checkbox, otherwise it may interfere with your Dolby audio conversion.
Your Teranex Mini will retain its last settings whether applied via switch, Smart Panel or Teranex
setup utility. If reverting to switch control after removing the Smart Panel or updating your
converter’s settings via software, you may need to toggle individual switches for new settings to
take effect.
Teranex Mini Smart Panel Settings
If you have installed the optional Teranex Mini Smart Panel on your HDMI to SDI 12G converter,
the following menus will be available - ‘video,’ ‘audio,’ and ‘network.’ The settings available in
these menus are identical to those detailed in the section above.
For more information on changing settings using the Teranex Mini Smart Panel, refer to the
‘changing settings section in this manual.
Using Teranex Mini Smart Panel gives you access to
the same settings as Blackmagic Teranex Setup.
Select between ‘auto’, ‘force to HD’, or ‘force to
Ultra HD’ conversion settings using the ‘video’
settings page in Blackmagic Teranex Setup. You
can also set your converter to detect 60 frames
per second video and automatically convert it
to 59.94 frames per second for when connecting
to video equipment using the standard 59.94
frame rate. Adjust your analog audio levels and
AES/EBU levels using the ‘audio’ settings.
23 23 Teranex Mini - HDMI to SDI 12G