Switch 3 - Sample Rate Conversion, No Sample Rate Conversion
Set switch 3 to OFF to enable sample rate conversion, or ON to disable sample rate conversion.
This switch should almost always be set to OFF to ensure audio is embedded at the correct
sample rate for television.
When switch 3 is set to OFF this setting converts the sample rate of your analog or AES/EBU
audio and embeds audio into the SDI output at a sample rate of 48 kHz.
Switch 2 - Ch 2 or AES/EBU 3+4 Embed / Bypass
Once you have selected your audio channels, use switches 2 and 1 to select which channels to
embed or disable. The disable setting lets you avoid overwriting audio channels you wish to
keep in the audio signal.
Set switch 2 to ON to bypass channel 2, or AES/EBU channels 3 and 4. Set switch 1 to ON to
bypass channel 1, or AES/EBU channels 1 and 2.
Switch 1 - Ch 1 or AES/EBU 1+2 Embed/Bypass
See switch 2 description.
Audio Selection Tables
Input Audio Source
Switch 8
Switch 7
Switch Diagram
XLR Analog
OFF
OFF
XLR AES/EBU
OFF
ON
RCA Analog
ON
OFF
Optical
ON
ON
SDI Channel Tables
Analog Audio Channels
Switch 6
Switch 5
Switch 4
Switch Diagram
1-2
OFF
OFF
OFF
3-4
OFF
OFF
ON
5-6
OFF
ON
OFF
7-8
OFF
ON
ON
9-10
ON
OFF
OFF
11-12
ON
OFF
ON
13-14
ON
ON
OFF
15-16
ON
ON
ON
40
40
Teranex Mini - Audio to SDI 12G
Summary of Contents for teranex mini
