Blackmagicdesign cintel, Installation And Operation Manual

Page: 38 / 1074

TIP If ‘Enable 2 Pass HDR Scan’ is selected, click ‘Capture HDR’ after the
capture has begun to let DaVinci Resolve know you’ve reached the end of
your desired clip so it can now proceed to capture the high exposure pass.
If you scan the entire reel without clicking ‘Capture HDR’, the scanner
automatically proceeds with the high intensity scan from where you started
it until the end of the reel.
‚
Capture Clip: A more controlled means of scanning specific sections of film. After
you’ve used the transport controls and the In and Out button to define a section of film,
clicking ‘capture clip’ scans that one clip and then stops.
TIP If ‘Enable 2 Pass HDR Scan’ is selected, the high intensity HDR scan uses
the same In and Out points as the initial scan.
‚
Batch Clips: A way you can log multiple clips in advance of scanning them all at once
using the current light source settings in DaVinci Resolve’s film scanner panel. Log
each clip in advance by setting In and Out points for each section of film you want to
scan, and click the ‘log clip’ button to save that frame range as an unscanned clip in the
media pool. When you click ‘batch clips’, all unscanned clips will be scanned one after
the other until the job is complete. You can also select one or more unscanned clips,
and only the selected clips will be scanned. Furthermore, you can import an EDL that
corresponds to a particular film roll, and use the resulting logged clips for scanning.
NOTE When you click the ‘log clip’ button, Cintel Scanner applies the same
project settings to all clips in the batch, and uses the newest project settings
at the time of capture. You are advised to confirm the scanner settings before
starting the batch capture.
TIP If ‘Enable 2 Pass HDR Scan’ is selected, the high intensity HDR scan uses
the same sets of In and Out points as the initial batch of scans.
For more information on batch capture workflows, refer to the ‘Ingesting From Tape’
chapter in the DaVinci Resolve manual.
‚
Snapshot:
Capture a single frame with normal exposure and current
scanner settings.
NOTE Once scanning, if DaVinci Resolve detects that your storage bandwidth
is too low to capture at the selected speed, the scan speed will automatically
adjust to ensure the capture is successful. If you are using the optional Audio
and KeyKode Reader accessory, the audio sample rate will also be adjusted to
maintain your chosen audio quality.
38 Capturing from Cintel using DaVinci Resolve