Blackmagicdesign ATEM Mini, Installation And Operation Manual

Page: 129 / 2014

Click the ATEM Streaming Bridge icon in ATEM Setup to open the settings
Now you can see information such as the ATEM Streaming Bridge name and the network
settings. If you are connecting via the local network, then most of the time you can select
DHCP. This will let your ATEM Streaming Bridge find its network address on the network
automatically and this is how most people connect their computers to a local network.
With DHCP the network itself will take care of the correct network settings for anything
connected to it. It’s the easiest way to connect.
However if you have a network administrator, it’s possible your network might have custom
IP addresses for all the equipment connected to it. It’s best to check with your network
administrator if they are managing your computers and network in your company.
Now you have the ATEM Streaming Bridge set to DHCP, try looking at the platform menu on the
ATEM Mini Pro or Extreme switcher again to see if the ATEM Streaming Bridge has appeared in
the list. The switcher should automatically see the ATEM Streaming Bridge on your network.
Changing the ATEM Streaming Bridge name
While you are using the ATEM Setup, it’s a good idea to give your ATEM Streaming Bridge a
custom name. If you are using it on a projector in a public space in your building, perhaps call it
“Main Projector” or if you are using it for a large television in a conference room, perhaps call it
“Conference Room 3” or similar. This means when you have more than one ATEM Streaming
Bridge, you can tell which one is which.
129 Creating Video Links with ATEM Streaming Bridge