6
PRODUCT OVERVIEW
Transmitter Front Panel
1.
POWER: The LED illuminates when power is applied.
2.
FIBER: The LED illuminates when there is a valid fiber optic
connection between the transmitter and the receiver.
3.
HDMI IN/LOOP: The IN LED illuminates when there is a valid HDMI®
signal on the HDMI IN port. The LOOP LED illuminates when the
HDMI OUT port is connected to an HDMI display.
4.
IR IN: 3.5mm jack for connecting an IR receiver to send IR signals to
the receiver for controlling the remote display from the transmitter
location.
5.
IR OUT: 3.5mm jack for connecting an IR transmitter to send IR
signals for controlling the HDMI source device from the receiver
location.
6.
AUDIO: Switch for selecting the audio source. When set to the
HDMI position, the transmitted HDMI signal uses the audio
embedded in the video source signal. When set to the LINE
position, the audio in the video source signal is replaced with audio
from the LINE IN jack on the rear panel. Note that even if there is no
video input, audio from the LINE IN jack can be transmitted to the
receiver.
