7
7.
EDID: Two DIP switches for setting the EDID® that is sent to the
video source device. Refer to the
EDID MANAGEMENT
section for
details on setting the switches.
8.
SERVICE: Micro USB port for performing firmware updates.
Transmitter Rear Panel
9.
DC 5V: DC barrel connector for connecting one of the included AC
power adapters.
10.
FIBER: Fiber optic transmitter module with an LC connector for
connecting a single-mode fiber optic cable to send signals to the
receiver.
11.
HDMI OUT: HDMI® loop output port for connecting a local HDMI
display.
12.
HDMI IN: HDMI input port for connecting an HDMI video source
device.
13.
LINE IN: 3.5mm stereo audio input for connecting an external audio
source to embed into the transmitted signal.
14.
RS-232: 3-pin Euroblock RS-232 passthrough connector for
transmitting RS-232 control signals between the transmitter and
receiver.
