8
Receiver Front Panel
1.
POWER: The LED illuminates when power is applied.
2.
FIBER: The LED illuminates when there is a valid fiber optic
connection between the transmitter and the receiver.
3.
HDMI: The LED illuminates when there is a valid connection
between the receiver and a connected HDMI® display.
4.
IR IN: 3.5mm jack for connecting an IR receiver to send IR signals to
the transmitter to control the video source device from the
receiver location.
5.
IR OUT: 3.5mm jack for connecting an IR transmitter to send IR
signals for controlling the connected HDMI display from the
transmitter location.
6.
SERVICE: Micro USB port for performing firmware updates.
Receiver Rear Panel
7.
DC 5V: DC barrel connector for connecting one of the included AC
power adapters.
