9
8.
FIBER: Fiber optic receiver module with an LC connector for
connecting a single-mode fiber optic cable to receive signals from
the transmitter.
9.
HDMI OUT: HDMI® port for connecting an HDMI display.
10.
AUDIO OUT: 3.5mm stereo audio output jack for connecting an
external amplifier or speakers to play audio de-embedded from the
HDMI signal.
11.
RS-232: 3-pin Euroblock RS-232 passthrough connector for
transmitting RS-232 control signals between the transmitter and
receiver.
EDID MANAGEMENT
Extended Display Identification Data (EDID®) is data sent to the HDMI®
source device that tells the maximum video resolution and best audio
format that can be used by the connected display(s). The EDID DIP
switches on the front panel of the transmitter determine which EDID is
sent to the connected video source device.
DIP Switch
Positions
EDID
11
Gets EDID from the display connected to the receiver
10
Gets EDID from the display connected to the transmitter
01
Sets EDID to 4K@60Hz with 2-channel audio
00
Sets EDID to 1080p@60Hz with 2-channel audio
