Blackbird 24279 User Manual Download Page 2

  

SAFETY WARNINGS AND GUIDELINES 

Please read this entire manual before using this device, paying extra 
attention to these safety warnings and guidelines. Please keep this manual 
in a safe place for future reference. 

 

This device is intended for indoor use only. 

 

Do not expose this device to water or moisture of any kind. Do not 
place drinks or other containers with moisture on or near the 
device. If moisture does get in or on the device, immediately 
remove it from its power source and allow it to fully dry before 
reapplying power. 

 

Do not touch the device, the power cord, or any other connected 
cables with wet hands. 

 

Do not expose this device to excessive vibration or extreme force, 
shock, or fluctuations in temperature or humidity. 

 

Do not expose this device to excessively high temperatures. Do not 
place it in, on, or near a heat source, such as a fireplace, stove, 
radiator, etc. Do not leave it in direct sunlight. 

 

Prior to operation, check the unit and power cord for physical 
damage. Do not use if physical damage has occurred. 

 

Before plugging the unit into a power outlet, ensure that the outlet 
provides the same type and level of power required by the device. 

 

Unplug this device from the power source when not in use. 

 

Take care to prevent damage to the power cord. Do not allow it to 
become crimped, pinched, walked on, or become tangled with 

Summary of Contents for 24279















Reviews: