User Manual 3D-Printer
Version 2018-3.1_ENG
5
2
Safety messages
The Blackbelt 3D Printer has been designed and build using modern techniques and using appropriate safety
precautions. Improper use may cause severe danger / injury to body and surroundings, as well as damage to
the printer itself and peripheral appliances.
Service and maintenance of the Blackbelt 3D Printer shall only be carried out by qualified personal, taking into
account the safety warnings displayed on the machine and full awareness of the user manual. Keep children and / or
unqualified staff away from the machine.
1.
This machine is only intended to be used for processes and ambient conditions as described in the chapter 1:
“
Technical specifications and tolerances
”
of this user manual. Any other use is prohibited and not allowed by
BlackBelt 3D BV. Any other use will create direct and present danger to the user and its surroundings.
2.
It is prohibited at all times, to modify the machine without prior written consent of Blackbelt 3D BV.
3.
The machine shall be positioned in such as manner, that at any time there will be enough free moving space
around the machine for demonstrations/ service trainings and carrying out maintenance and inspections.
4.
Keep the printer location clean and well illuminated. A messy or poorly illuminated printer location can cause
safety hazards and injury.
5.
Keep hands, hair, loose clothing and jewelry away from the moving parts of the machine. Wear appropriate
clothing. We strongly advise to wear safety glasses and gloves when working with the BlackBelt 3D Printer.
6.
As long as the machine is in use and switched on, no connector or safety precautions shall be removed. Only use
the machine if all safety precautions are installed and ready for use.
7.
Prescribed service intervals and maintenance instructions as mentioned in this user manual must be maintained
at all times.
8.
Only allow qualified personnel to replace spare parts and carry out maintenance and repairs.
9.
As addendum to this manual, general and local regulations with respect to Safety / Health and Environment (SHE)
shall be maintained at all times, including the use of personal protection equipment.
10.
Always inform the users of the Blackbelt 3D Printer in time prior to starting maintenance or repairs.
Completely switch of the main power switch and remove the connector from the wall socket.
11.
If a part or sub-assembly of the Blackbelt 3D Printer has been damaged or is not functioning properly, please
cease all activities or print jobs immediately. Only resume activities if the part has been repaired or replaced by a
spare part. Please contact or your supplier or consult with Blackbelt 3D BV, if the machine is not functioning
properly.
12.
Machine parts shall be disposed in accordance with local laws / regulations.
2.1
Explanation of pictograms and symbols
Pictogram
Explanation:
Please read and understand the contents of this installation and user manual carefully.
It contains important information about commissioning and maintenance of the machine.
Warning!
Important attention points / instructions concerning safety or damage prevention are highlighted
with this warning sign.
Electrical Safety
E-Cabinet 110 / 230V voltage inside.
Entrapment hazard / Mechanical safety
Caution: moving parts
Hot Surface.
Burn Risk by touching the hot surface (up to 120C).