User Manual 3D-Printer
Version 2018-3.1_ENG
40
8
Maintenance
Please follow all prescriptions as described in this manual. In particular chapter 2 : Safety messages.
Maintenance of this machine shall only be carried out by qualified staff following the warning signs on the
machine and taking into account the recommendations in this user manual. To re-assure the functionality of
the machine we advise in case of accidents to consult Blackbelt 3D BV immediately. Please doublecheck if the
instructions in this manual have been executed properly. If the machine is still not functioning properly, please
consult the Blackbelt 3D BV service desk. (mail : [email protected])
Keep hands / hairs / loose clothing / jewelry away from moving parts in the machine. Wear appropriate clothes
preventing loose hanging clothing parts.
As long as the machine is active and / or switched on, no connector or safety feature shall be removed.
Only use the machine if all safety features are in place and functional.
Inform your staff or users prior to starting maintenance or repairs. Switch of the main power switch.
8.1
Preventive maintenance
For regular use of the machine the maintenance schedule below can be used in regular intervals. In case of
intensified use or use in extreme circumstances the maintenance schedule intervals need to be doubled.
Item
Frequency
Remarks
Machine
Continuously
Keep the conveyor belt clean. Remove materials that can disrupt
the functionality of the machine
Machine
Continuously
Assure there is enough filament on the spool to print a part
Machine
Daily
Doublecheck if all moving parts do not jam and move correctly.
Broken or damaged parts shall be removed and replaced upon
repair. Printing using damaged parts will shorten the lifetime of
other components.
Bearings / linear bearings
Every 6 months Apply grease type LG2 (bearing grease) Use a grease gun.