x
Part
II:
Setting Up
The
Log
Splitter
19
11.
Assembling the exhaust guard
Assemble the guard as shown in Figures 46 to 48. There may be one
too many bolts included. You can keep it as a spare.
Fig. 46 Guard and bolts
Fig. 48 Attached guard
12.
Assembling the exhaust
baffle
Attach the baffle as shown in
Figures 49 to 51. Make sure
the exhaust fumes are
directed to the side as shown
in Figure 51, to avoid burns in
the event of bending over the
machine.
Fig. 47 Correct arrangement in the
back
Summary of Contents for GTE-2000
Page 1: ...GTE 2000 WOOD CHIPPER Instruction Manual Table of Contents ...
Page 3: ...Part I GeneralSafety Rules 2 Safety Labels Found on Your Unit ...
Page 16: ...Part II Setting Up The Log Splitter 15 tighten the plate again using the four bolts ...
Page 24: ...x Part II Setting Up The Log Splitter 23 Fig 63 Open choke and fuel shut off Choke Fuel tap ...
