16
8.
Attaching the discharge chute
Attach the discharge chute as shown in Figures 31 to 37.
Fig. 34 Loosen nylon nuts and bolts.
9.
Attaching the feed hopper and wiring the safety switch
Attach the feed hopper as
shown in Figures 38 to 42 and
Fig. 31 Chute parts
Fig. 35 Upper chute part
Fig. 32 Loosen four bolts
Fig. 36 Rotatable upper chute part
Fig. 33 Screw on bottom chute part
Fig. 37 Adjusting the discharge range
Summary of Contents for GTE-2000
Page 1: ...GTE 2000 WOOD CHIPPER Instruction Manual Table of Contents ...
Page 3: ...Part I GeneralSafety Rules 2 Safety Labels Found on Your Unit ...
Page 16: ...Part II Setting Up The Log Splitter 15 tighten the plate again using the four bolts ...
Page 24: ...x Part II Setting Up The Log Splitter 23 Fig 63 Open choke and fuel shut off Choke Fuel tap ...
