Part
II:
Setting Up
The
Log
Splitter
12
Abb.17 Bolted wheel
5.
Remove the belt pulley cover and grease the shaft
Remove the four bolts on the cover and set the cover and bolts
aside for the time being. Then, grease the shaft on the grease
nipples (Fig. 22 and 23).
Fig. 14 Wheels
Fig. 18 Assembled wheels and stand
Fig. 20 Loosening bolts on the right
Summary of Contents for GTE-2000
Page 1: ...GTE 2000 WOOD CHIPPER Instruction Manual Table of Contents ...
Page 3: ...Part I GeneralSafety Rules 2 Safety Labels Found on Your Unit ...
Page 16: ...Part II Setting Up The Log Splitter 15 tighten the plate again using the four bolts ...
Page 24: ...x Part II Setting Up The Log Splitter 23 Fig 63 Open choke and fuel shut off Choke Fuel tap ...
