RYAN 61 -
Item code: BH73.
INSTRUCTION MANUAL
5
4) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.
3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
2) Using a modeling knife, remove the cov-
ering at possition show below.
Remove
covering
Servo tray.
5. Instal servo tray with aileron servo into
the wing as same as picture below.
Electric wire
thread
2x10mm.
Secure
Secure
Servo tray.
3mm x 40mm.
Nilon control clasp
.
M3 lock nut.
2.INSTALLING THE AILERON CONTROL HORN.
Summary of Contents for BH73
Page 10: ...RYAN 61 Item code BH73 Instruction Manual 10 Mark point Secure cut Mark point Secure...
Page 14: ...RYAN 61 Item code BH73 Instruction Manual 14 C A glue 4 x 12mm Secure Epoxy glue C A glue...
Page 15: ...RYAN 61 Item code BH73 INSTRUCTION MANUAL 15 Secure 3 x 12mm Cut Tie wrap...
Page 30: ...RYAN 61 Item code BH73 Instruction Manual 30 Rudder pushrod Elevator pushrod Elevator pushrod...