RYAN 61 -
Item code: BH73
.
Instruction Manual
32
3. Position the battery pack and receiver
behind the fuel tank. Use two tie wraps to
hold the battery and receiver securely in place.
As pictures below.
Do not permanently secure the receiver
and battery until after balancing the model.
4. Using a 2mm drill bit, drill a hole through
the side of the fuselage, near the receiver,
for the antenna to exit.
Battery
Tie wrap.
Receiver.
WING ATTACHMENT.
Remove covering
Insert and secure.
Wing bolt.
Summary of Contents for BH73
Page 10: ...RYAN 61 Item code BH73 Instruction Manual 10 Mark point Secure cut Mark point Secure...
Page 14: ...RYAN 61 Item code BH73 Instruction Manual 14 C A glue 4 x 12mm Secure Epoxy glue C A glue...
Page 15: ...RYAN 61 Item code BH73 INSTRUCTION MANUAL 15 Secure 3 x 12mm Cut Tie wrap...
Page 30: ...RYAN 61 Item code BH73 Instruction Manual 30 Rudder pushrod Elevator pushrod Elevator pushrod...