Black Horse Model BH73, Instruction Manual Book

Page: 28 / 36

RYAN 61 -
Item code: BH73
.
Instruction Manual
28
Elevator servo.
Throttle pushrod.
1. Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket
should be centered on the plywood plate.
2. Using a pen, mark the locations of the
two mounting screws. Remove the tail wheel
bracket and drill 1mm pilot holes at the loca-
tions marked.
3. Secure the tail wheel bracket in place
using three 3mm x 12mm wood screws. Be
careful not to overtighten the screws.
MOUNTING THE TAIL WHEEL
BRACKET.
3x12mm
Mark point
C/A glue.
Secure
Throttle servo
Rudder servo
Elevator servo
C/A glue.