Black Horse Model BH73, Instruction Manual Book

Page: 21 / 36

RYAN 61 -
Item code: BH73.
INSTRUCTION MANUAL
21
1. Install one adjustable metal connector
through the third hole out from the center of
one servo arm, enlarge the hole in the servo
arm using a 2mm drill bit to accommodate the
servo connector. Remove the excess mate-
rial from the arm.
After installing the adjustable metal con-
nector apply a small drop of thin C/A to
the bottom nut. This will prevent the con-
nector from loosening during flight.
Servo arm.
Connector.
INSTALLING THE THROTTLE PUSHROD.
Throttle servo
Secure
Throttle pushrod.
SERVO INSTALLATION.
ELEVATOR INSTALLATION.
2. Mount the servo to the tray using the
mounting screws provided with your radio sys-
tem.
1. Install the rubber grommets and brass
collets into the elevator servo. Test fit the servo
into the servo tray.
Throttle servo
Horizontal stabilize installation .
See picture below.
HORIZONTAL STABILIZER, VESTICAL
INSTALLATION.
1. Draw a center line onto the horizontal
stabilizer. Then put the horizontal into the fuse
large.
center line