PZL 104 Wilga
.
Item code: BH156.
Instruction Manual
11
RUDDER CONTROL HORN INSTALLATION
Rudder control horn install as same as method of
elevator control horn.
Push in
Control horn
2. Push in
1. A+B Epoxy glue
M2 Lock nut
M2
Rudder pushrod
Rudder
control horn
VII. GEAR INSTALATION
Rudder pushrod
Connector
Servo arm
Secure
Cut
Rudder servo
1. MOUNTING THE TAIL WHEEL
BRACKET
Set the tail wheel assembly in place on the plywood
plate.The pivot point of the tail wheel wire should be
even with the rudder hinge line and the tail wheel
bracket should be centered on the plywood plate.
4x15mm
3x15mm
5x35mm
6mm
90
o
Mark
Control horn
Silicone Tube
Rudder
M2
Pushrod
