Black+Decker JBG800-B5, Original Instructions Manual

Page: 5 / 24

• Never pull the power supply cord to disconnect the plug
from the socket. Keep the power supply cord away from
heat, oil and sharp edges.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
• Disconnect the appliance from the power supply when not
in use and before cleaning.
• Do not fill the appliance above the maximum level.
• Overfilling the appliance could cause a hazard.
• Overfilling the appliance could cause water to spill.
• Be careful if hot liquid is poured into the food processor or
blender as it can be ejected out of the appliance due to a
sudden steaming.
After use
• Switch off, remove the plug from the socket and let the
appliance cool down before leaving it unattended and
before changing, cleaning or inspecting any parts of the
appliance.
• When not in use, the appliance should be stored in a dry
place. Children should not have access to stored
appliances.
Inspection and repairs
• Before use, check the appliance for damaged or defective
parts. Check for breakage of parts, damage to switches
and any other conditions that may affect its operation.
• Do not use the appliance if any part is damaged or
defective.
• Have any damaged or defective parts repaired or replaced
by an authorised repair agent.
• Before use, check the power supply cord for signs of
damage, ageing and wear.
• Do not use the appliance if the power supply cord or
mains plug is damaged or defective.
• If the power supply cord or mains plug is damaged or
defective it must be repaired by an authorised repair agent
in order to avoid a hazard. Do not cut the power supply
cord and do not attempt to repair it yourself.
• Never attempt to remove or replace any parts other than
those specified in this manual.
• Allow moving parts to come to a stop before removing any
cover.
• Do not immerse the appliance, cord set or plug in any
liquids.
• Unit must be attended in use.
• Keep loose clothes & long hair away from the inlet chute &
any moving parts.
• Take care when handling the sharp cutting blades, when
emptying the bowl and during cleaning.
• Take care when handling sieve during installation or
cleaning.
Extension cables
• Up to 30m (100 ft) can be used without loss of power.
• If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Symbols on appliance
The following symbol is shown on the appliance .
Warning! Sharp blades, always use the food
plunger, keep fingers out of juicer opening and
moving parts.
Features
1. Pusher
2. Lid/protective cover
3. Sieve
4. Spout
5. Main body
6. Juice cup
7. Clamp
8. Control knob
9. Pulp collector
10. Filler Cap
11. Lid
12. Blender jug
13. Jug base
14. Seal
15. Blender blade holder
16. Mincer spatula
17. Mincer jug lid
18. Mincer jug
19. Mincer blade
20. Mincer blade holder
21. Grinder jug
22. Grinder blade
23. Grinder blade holder
Use
The following settings are available :
O = Power off
1 = Low speed
2 = High speed
• Take care when handling sieve during installation or
cleaning.
Extension cables
• Up to 30m (100 ft) can be used without loss of power.
• If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Symbols on appliance
The following symbol is shown on the appliance .
Warning! Sharp blades, always use the food
plunger, keep fingers out of juicer opening and
moving parts.
Features
1. Pusher
2. Lid/protective cover
3. Sieve
4. Spout
5. Main body
6. Juice cup
7. Clamp
8. Control knob
9. Pulp collector
10. Filler Cap
11. Lid
12. Blender jug
13. Jug base
14. Seal
15. Blender blade holder
16. Mincer spatula
17. Mincer jug lid
18. Mincer jug
19. Mincer blade
20. Mincer blade holder
21. Grinder jug
22. Grinder blade
23. Grinder blade holder
Use
The following settings are available :
O = Power off
1 = Low speed
2 = High speed
5
ENGLISH
(Original instructions)