Español
14
Fig. D
Removing Dust Bowl and Filters
NoTICE:
Maximum dust collection will only be obtained
with a clean filter and an empty dust bowl.
NoTICE:
Empty dust bowl before it becomes overfilled.
If dust begins to fall back out of the product after it is
switched off, it is too full and requires emptying.
• Press the bowl release button
2
and pull the dust bowl
3
away from the body of the auto vac.
• While holding the dust bowl over a bin, pull the filter
out to empty the contents of the bowl.
NoTICE:
The auto vac has a pre-filter and an inner filter. The
filters should be separated to allow better cleaning.
• To separate the filters, twist the pre-filter
10
in a
clockwise direction and lift away from the inner filter
11
as shown in
(Fig. F).
• Shake or lightly brush any loose dust off both filters.
• To replace the filters, slide the pre-filter over the inner
filter.
• Align the wings of the pre-filter with the slots in the
inner filter and twist in a counterclockwise direction as
shown in
(Fig. G).
• Place filters back into the bowl pressing firmly to ensure
a secure fit. Place the dust bowl back onto the auto vac
until it “clicks” firmly into position..
WARNING:
It is very important that the filter is
correctly in position before use.
Fig. E
Fig. F
Fig. G
Cleaning the Dust Bowls and Filters
NoTICE:
Wash the filters regularly. The cleaner the filter is,
the better the product will perform.
• Remove the dust bowl and filter as described in
“Removing Dust Bowl and Filters.”
• The dust bowl and filters can be washed in warm soapy
water.
• Allow to dry before placing back into the auto vac.
• Once clean and dry, place filters back into the bowl
pressing firmly to ensure a secure fit. Place the dust
bowl back onto the auto vac until it “clicks” firmly into
position.
Replacing Filters
The filters should be replaced every 6 to 9 months
depending on frequency of use, or when they are worn or
damaged. Replacement filters (Catalog Number: VF110) are
available from your BLACK+DECKER dealer.
Visit www.blackanddecker.com to locate dealers.
• Remove the old filters as described above.
• Fit the new filters as described above.
MAINTENANCE AND CLEANING
Your BLACK+DECKER cordless appliance has been designed
to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper appliance care and regular cleaning.
WARNING:
Before performing any maintenance or
cleaning on cordless appliances switch off and unplug
the appliance.
10
11
