manualshive.com logo in svg

Black Box Voice Pro FX700A, Manual

Introducing the "Black Box Voice Pro FX700A" - an exceptional audio enhancement device with unparalleled features. Unlock the full potential of your voice with this powerful tool. Access the comprehensive user manual for free download at manualshive.com, providing step-by-step instructions for effortless setup and seamless operation.

Share
Download
background image

67

CHAPTER 5: Using the Voice Pro System

5.6 Door Chime Box

You can program any station on your Voice Pro as a door station. Once installed
and programmed, the door chime can be accessed and answered like any other
station on your system.

To answer the door:

1. Lift the receiver.

2. Press 

*

.

3. Dial the station number for the door chime.

4. Speak to the guest at the door.

At the door (Hands-free speaking):

1. Press the door chime.

2. When answered, speak with the party.

We recommend that you have a professional telecommunications vendor install
the door chime box.

Summary of Contents for Voice Pro FX700A


































































































Reviews:

No comments

Related manuals for Voice Pro FX700A

Brands by name

Popular brands

Load more brands