39
CHAPTER 4: Programming the Voice Pro System
4. Enter the minute (valid entries are 00–59), and then press
#
.
5. Press
1
for AM or
2
for PM, and then press #.
6. Enter the hour night mode is to end (valid entries are 1–12), and then press
#
.
7. Enter the minute (valid entries are 00–59), and then press
#
.
8. Press
1
for AM or
2
for PM, and then press
#
.
Default: Starts 3:01 AM; Stops 3:02 AM and contains Greeting 1.
Example: If you want to start night mode at 1:10 AM and stop at 6:00 PM, enter
1#10#1#6#0#2#
.
IMPORTANT
Night mode cannot be disabled. Instead, set night mode to start and end
when there is minimal telephone traffic.
P
ROGRAM
13: M
USIC ON HOLD
Default: Permanently enabled. This entry is invalid.
P
ROGRAM
14: S
ET TIME
-
OUT FOR
“
RING NO ANSWER
”
M
This program allows you to set the number of rings a station will ring before it is
automatically transferred to a voice mailbox.
1. While in programming mode, and when prompted for the program number,
enter
14
.
2. Press
#
.
3. When prompted to set the number of rings before a call is diverted to a voice
mailbox when not answered, enter the number, and then press
#
.
(Default: 6 rings.)
P
ROGRAM
15: A
SSIGN GREETINGS TO TELEPHONE COMPANY LINES
M
Use this program if you want to have a separate greeting for an incoming line. (For
example, two different companies using the same Voice Pro.)
1. While in programming mode, and when prompted for the program number,
enter
15
.
2. Press
#
.
M
indicates that the program can be monitored using
Program 50 (50#). See Program 50 for details.
