37
CHAPTER 4: Programming the Voice Pro System
NOTE
All incoming faxes will be automatically switched to the assigned
station. Refer to Program 31 for additional setup information.
P
ROGRAM
8: S
ET TIMER FOR HOLD RECALL AND PARK ORBIT
M
This program sets a recall timer in seconds. Calls placed on hold or in a park orbit
will ring back to the station that initiated the hold when the timer expires.
1. While in programming mode, and when prompted for the program number,
enter
8
.
2. Press
#
.
3. When prompted to set the timer, enter the number in seconds, and then
press
#
. For example, if you want the station to ring back in 30 seconds, enter
30#
.
Default: 180 seconds.
P
ROGRAM
9: A
SSIGN PRIME LINES TO STATIONS
M
A prime line is the line that you want the extension to dial out on first. If in use,
then it will dial out on the next available line. A busy tone indicates all lines are in
use.
1. While in programming mode, and when prompted for the program number,
enter
9
.
2. Press
#
.
3. When prompted for the Line number, press
1
(for Line 1), and then press
#
.
4. Next assign the stations that will be automatically selected by the system. Enter
the station number(s) and then press
#
. For example, if Stations 10 and 11
are to use Line 1 for the outgoing line, press
1011#
.
Default: Station 10 on Line 1, Station 11 on Line 2, Station 12 on Line 3, and
Station 13 on Line 4.
M
indicates that the program can be monitored using
Program 50 (50#). See Program 50 for details.
