66
8-PORT SERIAL PORT MANAGER WITH INTEGRAL MODEM
Terse: 5. If “y,” memory test and initialization begins.
(The terse commands are numeric responses to specific commands as opposed to
verbal responses. The Serial Port Manager will respond with a different number
depending on the command issued.)
D
ISPLAY
S
ITE
ID
Displays the user-defined site ID message.
Availability: Supervisor/User
Format:
/J
[
Enter
]
Response: Displays site ID message.
S
ET
RS-232 P
ORT
P
ARAMETERS
Displays a menu that allows you to select options and parameters for the selected
port.
Section 5.5.3
describes the procedure for defining port parameters.
Availability: Supervisor only
Format:
/P
[
x
] [
Enter
]
where
x
is the number or name of the port to be configured. If the port number or
name is not specified, the Serial Port Manager displays the Configuration menu for
your resident port.
Response: The Port Parameters menu displays.
D
ISPLAY
P
ORT
S
TATUS
Displays the Port Status screen, which lists current conditions and parameters for
all ports. Normally, the Port Status screen does not display port passwords. The
password column options include defined or undefined (depending upon whether
or not the password for each port is specified). When the Supervisor mode is
active, the /SP command offers the option to either display or suppress port
passwords. In User mode, the /S command only displays information for the ports
that share the same password entered at login. For more information on the Port
Status screen, refer to
Section 7.1
.
Availability: Supervisor/User
Format:
/S[P]
[
Enter
]
Summary of Contents for SW544A-M
Page 3: ......