35
CHAPTER 5: Configuration
NOTE
You don’t have to define all port parameters. For example, use the /CP
command to select only the baud rate for all ports.
NOTE
The /CP command copies the parameters currently displayed by the
Copy Port Parameters menu. Although the port password is not
displayed, the selected password is copied if the field for this item reads
defined.
4. Clear Menu: After defining several parameters, if you want to clear the /CP
menu and start again, type
-
(dash) and press
Enter
. The menu will be reset.
5. Exit Without Copy: To exit from the Copy Parameters menu without copying
selected parameters to all RS-232 ports, type
X
and then press
Enter
. The
Serial Port Manager exits from the Copy Parameters menu and returns to the
command prompt.
6. Copy Parameters: When you finish selecting parameters, press
Esc
to copy the
selected parameters to all Serial Port Manager RS-232 ports and exit from the
Copy Port Parameters menu. The Serial Port Manager displays a “Sure?”
prompt before copying parameters to other ports.
5.7 Save User-Selected Parameters
Although this step is optional, we strongly recommend that you save all user-
defined parameters to an ASCII file. This allows quick recovery if port parameters
are accidentally deleted or reconfigured.
Chapter 9
describes the procedure for
saving configuration parameters to an ASCII file.
Summary of Contents for SW544A-M
Page 3: ......