Black Box SW544A-M, Manual, Page: 37 / 74

34
8-PORT SERIAL PORT MANAGER WITH INTEGRAL MODEM
Figure 5-2. The Copy Port Parameters menu.
To select common parameters for all Serial Port Manager RS-232 ports:
1. Access the Serial Port Manager Command mode. If the password prompt
displays, type in your supervisor-level password.
2. At the command prompt, type
/CP
and press Enter . The menu shown in
Figure 5-2 displays.
3. Selecting Parameters: To copy parameters, type in the number for the desired
parameter, press Enter , and then follow the instructions in the submenu.
COPY PORT PARAMETERS
1. Port Name: (undefined)
2. Password:
3. Baud Rate:
4. Bits/Parity:
5. Stop Bits:
6. Handshake Mode:
7. Port Mode:
74. DTR Output:
8. Supervisor Mode:
9. Logoff Character:
10. Sequence Disconnect:
11. Timeout Disconnect:
12. Response Type:
13. Command Echo:
14. Accept Break:
(Note: Ports 1 & 2 will NOT have restricted values changed.)
Enter: Parameter # <CR> to define parameter value to copy to all ports.
<CR> to remove all values set,
X<CR> tp exit WITHOUT copy,
<ESC> to copy to all ports and exit …