61
CHAPTER 11: Command Reference Guide
NOTE
The resident disconnect sequence can be redefined via the Port
Configuration menus.
6. Third-party disconnect: Disconnects two or more nonresident ports. Must be
issued from a third port with supervisor-command capability.
11.4 Command Set
This section provides more detailed information on all Serial Port Manager
commands.
E
NTER
C
OMMAND
M
ODE
To set parameters or connect ports, first access the Command mode as described
in
Section 5.1
. When the Command mode is inactive (port asleep), the port
responds only when you press the
Enter
key without any characters preceding it. If
the supervisor password is defined, the Serial Port Manager requires a password
before allowing access to Command mode.
Availability: Supervisor/User
Format: [
Enter
] (Press [
Enter
] twice if other characters have already been typed.)
Response: The Port Status screen appears, followed by the APS> prompt.
R
ESIDENT
D
ISCONNECT
S
EQUENCE
The resident disconnect sequence disconnects your resident port from another
port. For example, if you are communicating via port 3, and port 3 is connected to
port 4, the resident disconnect sequence disconnects port 3 from port 4. Although
the default resident disconnect sequence is
^X
([
Ctrl
] and [
X
]), the command
format and logoff character is also redefined via the Port Configuration menus as
described in
Section 5.5.3
.
NOTE
A three-character disconnect command is also selected.
Availability: Supervisor/User
Format:
^X
Summary of Contents for SW544A-M
Page 3: ......