17
CHAPTER 3: Quick-Start Guide
iii. Issue a third-party disconnect command to disconnect ports 2 and 3.
The Serial Port Manager displays the “Are you Sure (y/n)?” prompt.
Type
y
and press
Enter
to disconnect.
iv. Type
/S
and press
Enter
to display the Port Status screen. The
STATUS column now lists ports 2 and 3 as free.
10. Exit Command Mode: From the APS> prompt, type
/X
and press
Enter
. The
Serial Port Manager exits from Command mode.
11. Access Command Mode via Modem: From a PC with a modem and telco line,
dial the number for the line that’s connected to the Serial Port Manager’s
internal modem. Once the connection is established, the Serial Port Manager
sends the APS> prompt, indicating that you’ve successfully accessed the
Command mode.
a)Type
/H
and press
Enter
to display the Help menu. If desired, you may
also want to repeat the Port Connection/Disconnection examples
described in step 9 on the previous page.
b)When you finish communicating with the Serial Port Manager, type
/X
and press
Enter
to exit the Command mode and terminate the modem
connection.
This completes the 8-Port Serial Port Manager with Integral Modem’s basic quick-
start guide. Proceed to
Chapters 4
and
5
for complete installation and
configuration procedures.
Summary of Contents for SW544A-M
Page 3: ......