40
MANAGEMENT CARD, SERIAL CONTROL CARD FOR SERVSWITCH™ MULTI
4.6.2 S
ETTING THE
I
DLE
T
IMEOUT
(N
OT
I
MPLEMENTED
)
This function is not implemented in the current version of the Management Card,
but it will become available in a future firmware release. When it is, the “idle
timeout” will be the amount of time a session is allowed to remain open after all
keyboard activity stops. Once this timeout expires, the idle session will be
automatically closed; the user will be returned to the User Options Menu. To set
the length of this timeout—which you can do now, to prepare for the future, even
though the timeout itself isn’t supported yet—take these steps:
1. At the Administrator Menu, press “I” to bring up the Idle Timeout screen.
2. You will be prompted to enter a number of minutes from 0 to 60. Type in this
number and press [Enter]. The new timeout value will be displayed on your
screen. You can then press any key to return to the Administrator Menu.
Idle Timeout
--------------------------
Current setting: 10 minutes
Enter new timeout value [0-60]: 30
New setting is 30 minutes
Press any key to continue...
