Black Box ServSensor JR EME102A, Manual, Page: 89 / 135

87
CONTENTS
87
Example: if a temperature sensor is connected on port 1 and a dry
contact cable is connected on port 2, and the temperature exceeds
threshold, then the management software can send an SNMP Set to the
dry contact on port 2 with the following command:
SNMPset 192.168.0.100 public .1.3.6.1.4.1.3854.1.2.2.1.18.1.8.1 i 1
The i denotes an integer value
i can take 2 values: 1 = output high, 2 = output low
This will make the dry contact pins output a +5V which can turn on a
relay.
For other examples, please see the file spinit.bat located at
\utilities\mib in the help CD.
For full definitions of all OIDs and their possible values please see the
file sp.mib