Black Box ServSensor JR EME102A, Manual, Page: 110 / 135

108
ServSensor JR
108
5.7 Network Settings
IP Address: You can change the IP address of your ServSensor JR
using this option. Enter the new IP address and click "Set".
Subnet Mask: Set the subnet mask of the device using this option.
Default Gateway: Set the default gateway of the device using this
option.
Use DHCP: The ServSensor JR can use DHCP to assign its IP address,
or can use a statically assigned IP address. To use DHCP choose Use
DHCP from the list box and press set. To stop using DHCP choose Do
Not Use DHCP from the list box and press set. Statically assigning an
IP address also turns off DHCP. You can force the ServSensor JR to
voluntarily give up its IP lease and request a new IP lease by choosing
Use DHCP from the list box and press set.
Ethernet MAC ID: This is the MAC ID of your ServSensor JR. This is
a read only field.
Ethernet Duplex Mode: This is the Duplex Mode and speed of your
ServSensor JR. This is a read only field.